by Kirsty | Jul 1, 2011 | Commercial Machinery
With DR Stump Grinder never again will you struggle with back-breaking and time consuming methods of stump removal like digging by hand, ripping out with a tractor and chains, burning or chemicals.Thanks to a world class Subaru engine and carbide-tipped cutting teeth, the DR Stump Grinder can pulverize any size stump and turn it into a pile of wood chips. Compact and manoeuvrable, the DR Stump Grinder can operate almost anywhere.The adjustable handlebars keep the operator comfortably in control. A simple, rugged design, with few moving parts, means this machine will be around for many years of fast stump removal. Note: Replacement Teeth not included. Hand Brake: 4.5″ drum and hand brake with mechanical caliper operated from left hand grip. Brake locks one wheel in place providing a pivot point for sweeping cut motion. Oversized Tyres: These lugged high-flotation tyres make for easy transport and give the machine full support during operation. Large size (15″ x 4.75″) helps to keep machine elevated over woodchips during operation. Carbide-Tipped Steel Teeth: 9 carbide-tipped cutting teeth (replaceable) are mounted to a ½” cutter head that supplies tremendous rotating inertia. Cutter head is housed in a protective directional steel shroud which shows exactly where the cutting teeth are making contact, while protecting operator from thrown debris. Teeth are tipped with mining-grade tungsten carbide. The full set of cutting teeth can be easily replaced in about 15 minutes (1 bolt for each of 9 cutting teeth). Engine: Subaru EX 27-9 Cylinder: Displacement 265cc Cutter Head Thickness: 1/2 inch Cutter Head Diameter: 10.5 inch Tooth RPM / Speed: 2789 / 88mph Construction Fully Welded: 12 ga. Steel Weight: 63...
by Kirsty | Jul 1, 2011 | Commercial Machinery
With DR Stump Grinder never again will you struggle with back-breaking and time consuming methods of stump removal like digging by hand, ripping out with a tractor and chains, burning or chemicals.Thanks to a world class Subaru engine and carbide-tipped cutting teeth, the DR Stump Grinder can pulverize any size stump and turn it into a pile of wood chips. Compact and manoeuvrable, the DR Stump Grinder can operate almost anywhere.The adjustable handlebars keep the operator comfortably in control. A simple, rugged design, with few moving parts, means this machine will be around for many years of fast stump removal. Note: Replacement Teeth not included. Hand Brake: 4.5″ drum and hand brake with mechanical caliper operated from left hand grip. Brake locks one wheel in place providing a pivot point for sweeping cut motion. Oversized Tyres: These lugged high-flotation tyres make for easy transport and give the machine full support during operation. Large size (15″ x 4.75″) helps to keep machine elevated over woodchips during operation. Carbide-Tipped Steel Teeth: 9 carbide-tipped cutting teeth (replaceable) are mounted to a ½” cutter head that supplies tremendous rotating inertia. Cutter head is housed in a protective directional steel shroud which shows exactly where the cutting teeth are making contact, while protecting operator from thrown debris. Teeth are tipped with mining-grade tungsten carbide. The full set of cutting teeth can be easily replaced in about 15 minutes (1 bolt for each of 9 cutting teeth). Engine: Subaru SP 170-6 Cylinder Displacement: 169cc Cutter Head Thickness: 1/2 inch Cutter Head Diameter: 10.5 inch Tooth RPM / Speed: 2789 / 88 mph Construction Fully Welded: 12 ga. Steel...
by Kirsty | Jul 1, 2011 | Commercial Machinery
Hydraulic feed 15cm (6″) Chipper with a powerful 730cc Kohler engine. Cantilevered rotor design eliminates wrapping. Extra long discharge chute rotates 360 degrees. 4 reversible, heat-treated steel blades. Triple-banded belt drive. 4 sided anvil. Engine: 730cc four stroke Kohler Chipping Capacity: 15cm (6″) Feed Roller: SmartFeed electronic Roller Jack: Hydraulic...
by Kirsty | Jul 1, 2011 | Commercial Machinery, Hitatchi, Turf Cutters
On Mand Auger, suitable for auger bits up to 200mm diameter. Single person operations. S start: soft and smooth engine recoil starter. PureFire engine for lower emissions and fuel consumption. Displacement: 50.2cc Max Power: 1.54kW Fuel Tank Capacity: 1000cc Shaft Diameter: 25.4mm Dimensions: 1200x600x490mm Dry weight: 17.0kg [btn label=”Request Order” url=”http://kgmltd.co.uk/order-now/”] Alternatively telephone: 01962...
by Kirsty | Jul 1, 2011 | Commercial Machinery, Hitatchi, Turf Cutters
Two Man Auger, suitable for auger bits up to 200mm in diameter. Two person operation. Adjustable handles for easy storage. Dual throttles for safer operation. Displacement: 50.2cc Max Power: 1.5kW Fuel Tank Capacity: 1000cc Shaft Diameter: 25.4mm Dimensions: 1200x600x490 Dry Weight: 17.0kg [btn label=”Request Order” url=”http://kgmltd.co.uk/order-now/”] Alternatively telephone: 01962...
by Kirsty | Jul 1, 2011 | Commercial Machinery, Gravely, Pro-walk Mowers
Pro-walks feature pro steer controls for improved productivity and performance. Pro-steer controls: improve both productivity and performance. Maintenance-free XL spindles: with durable cast iron housings. Rear discharge decks: with mulching options. Electromagnetic PTO clutch: engages blades smoothly and easily. Auto-belt tensioning: no adjustments necessary. Heavy duty: 7-ga.w1/4″ deck. Engine: Kawasaki Horsepower: 19 Drive System: Hydro Pump & Wheel Motor Fuel Capacity (L): 25.1 Ground Speed (approx. mph): 8.5 Starter: Recoil Front Wheel: Pneumatic Weight (kg): 310 HAVS (m/s2]WBV[m/s2): 3.4 Deck Material: 7 ga Deck Construction: Fixed Number of Blades: 3 Deck Drive: Belt Deck Engagement: Electric Clutch Deck Lift System: Manuel Cutting Width: 122cm (48″) Cutting Heights: 10-100mm Cutting Positions: 5 Mulch Kit: Optional [btn label=”Request Order” url=”http://kgmltd.co.uk/order-now/”] Alternatively telephone: 01962...
